Vigor Technology
MEMS Inclinometer
    SST20 Inclinometer
    SST100 Inclinometer
    SST200 Inclinometer
    SST300 Inclinometer
    SST400 Inclinometer
    CAN Inclinometer
    CANopen Inclinometer
    DeviceNet Inclinometer
    Ethernet Inclinometer
    USB Inclinometer
    ZigBee Inclinometer
    Wi-Fi Inclinometer
    GPRS Inclinometer
    PWM Inclinometer
    TOC Tilt Switch
    GPS Inclinometer
    Ranged Inclinometer
    Gyro Inclinometer
    FFT Inclinometer
    Thermal-shock-proof Inclinometer
    Submersible Inclinometer
    Tilt Beam Sensor
    Explosion-Proof Inclinometer
    In-Place Inclinometer
Dynamic Inclinometer
    SST800 Dynamic Inclinometer
    SST810 Dynamic Inclinometer
Servo Inclinometer
    SST500 Inclinometer
Levelmeter
    SST900 Levelmeter
Application Software
    iAngle Mobile Application Software
    iSS1 PC Application Software
Installing Tools
    Adjustable base with micrometer screw
    Adjustable base with bubble
    Fixed Installation Base
    Portable Battery Pack
 
Current location:Vigor Technology > MEMS Inclinometer> SST
SST20 Inclinometer
Features

- Low cost, high performance, suitable for batch application
- 50Hz refresh rate, 10Hz response frequency
- ±0.07°accuracy@-15~50℃
-±0.2% cross-axis error
- Available to horizontal, vertical, headstand, etc installation methods

- IP67protection
- 9~36VDC power supply
- Sensing elements survive to 1500g shock while operating

Applications

Vessel, Engineering machinery, Solar/wind energy, automobile/truck/vehicle, Communication/electric Tower monitoring, High-voltage pylon monitoring, Antenna, construction engineering, Landslide, etc
Performances Size & Wiring Descriptions Our Ability How to Order Documents

 Performances(@25℃ test conditions,except other notifications)

Range

±5°, ±10°, ±15°, ±30°, ±45°, ±60°, ±90°, 0~360°(±180°@single axis)

Accuracy

Digital output: ±0.07°@-15~50℃

Analog output: ±0.15°@-15~50℃

Resolution

0.01°

Cross-axis sensitivity

±0.5%FS

Repeatability

±0.02°

±0.05°

Offset

±0.02°

±0.05°

Measurement axis

1 or 2 axis

Bandwidth

10Hz(max)

Reponse time

1ms(no filtering)

Refresh rate

5Hz, (50Hz max)

Cold start warming time

60s

Function

zeroing、baud rate、refresh rate、zero point correction、bandwidth、ID address

 

 

 

 

Output

CAN2.0B:according to ISO11898-2 standard, twisted-pair output, 5k~1Mbit/s baud rate, support 127
nodes, max cable length 10Km, built in high speed photoelectric isolator

CANOpen: according to DS301、DS303、DS305 standard,confirm to CiA 410 protocol standard, 5k~1Mbit/s baud rate support 127 nodes, max cable length 10Km, built in high speed photoelectric isolator

Voltage output: 0.5~4.5VDC; output consumption 0.3Ω; load impedance<100Ω

Current output: 4~20mA; output consumption 50MΩ; load impedance 150~650Ω

RS485 output: 9600bps(adjustable), 8 data bits, 1 start bit,1 stop bit, none parity

Switch output:Darlington OC output, load with 1A @9~36VDC,alarm point can be pre-set in factory

 

Power supply

RS485/CAN/CANopen output: current consumption≤30mA@9~36VDC,no-load

Voltage/current output: current consumption≤15mA@9~36VDC,no-load

Switch output:current consumption≤10mA@9~36VDC, no-load

Operation temperature

-40~85℃

Storage temperature

-40~85℃

EMC

According to EN610000 and GBT17626

Insolation

≥100MΩ

MTBF

10 years

Shock

100g@11ms,three-axis,half-sine

Vibration

8grms, 20~2000Hz

Protection

IP67

Connecting

M12-5Pin socket

Weight

≤200g (without connector and cable)

 About Us
Exhibition Contact
 Introduction showcase Contact Us
    New Product News Distributor  
© 2015 Vigor Technology All Rights Reserved. Powered by vigordigital.com