Vigor Technology
MEMS Inclinometer
    SST20 Inclinometer
    SST100 Inclinometer
    SST200 Inclinometer
    SST300 Inclinometer
    SST400 Inclinometer
    CAN Inclinometer
    CANopen Inclinometer
    DeviceNet Inclinometer
    Ethernet Inclinometer
    USB Inclinometer
    ZigBee Inclinometer
    Wi-Fi Inclinometer
    GPRS Inclinometer
    PWM Inclinometer
    TOC Tilt Switch
    GPS Inclinometer
    Ranged Inclinometer
    Gyro Inclinometer
    FFT Inclinometer
    Thermal-shock-proof Inclinometer
    Submersible Inclinometer
    Tilt Beam Sensor
    Explosion-Proof Inclinometer
    In-Place Inclinometer
Dynamic Inclinometer
    SST800 Dynamic Inclinometer
    SST810 Dynamic Inclinometer
Servo Inclinometer
    SST500 Inclinometer
Levelmeter
    SST900 Levelmeter
Application Software
    iAngle Mobile Application Software
    iSS1 PC Application Software
Installing Tools
    Adjustable base with micrometer screw
    Adjustable base with bubble
    Fixed Installation Base
    Portable Battery Pack
Thermometer
    VTIR0812 Infrared Thermometer
    VTIR1816 Infrared Thermometer
    VTIR3816 Infrared Thermometer
 
Current location:Vigor Technology > MEMS Inclinometer> SST
SST200 Inclinometer
Features

- High reliability & performance-cost ratio
- Repeatability & Offset ±0.02°
- Response time 0.3s@t90
- Cross axis sensitivity less than ±0.3%FS
- Temperature drift reach ±0.1°@ -40~85℃ (Option)
- Full seal & anti-shock,IP67 protection
- Carried 50 industry & military standards

Applications
Factory automation,Precision instruments,Vessel,Engineering machinery,Aerospace,Civil engineering,
Military project.
Performances Size & Wiring Descriptions Our Ability How to Order Documents
Measurement range ±5° ±10° ±15° ±30° ±45° ±60° ±90°(Single-axis)
Accuracy (@25 ℃ ) ±0.05° ±0.08° ±0.1°
Temperature drift @ -20~65℃ ±0.03°/℃ ±0.005°/℃ ±0.009°/℃

Temperature drift(Option)
@ -20~65℃

±0.1° ±0.2°
Resolution ±0.003°
Offset repeatability ±0.02°
Offset ±0.02°
Cross-axis sensitivity ±0.3%FS
Measurement axis 1 or 2 axis,(only single-axis at ±90° range)
Digital output for SST250/SST260 RS232(optional:RS485,RS422)
Refresh Rate:5Hz(default)10Hz,20Hz(optional)
Format:19200 baud,8 data bits, 1 start bit, 1 stop bit,none parity,ASCII
CAN2.0:according to ISO11898-2 standard,5k~1MBit/s baud rate, support 127 nodes,
built in high speed photoelectric isolator
Voltage output for SST230/SST220 Voltage:0.5~4.5VDC
Output resistance:0.3Ω
Load resistance:<100Ω
Current output for SST210/SST220 Current:4~20mA
Output impedance:50MΩ
Load resistance:150~250MΩ
Response time 0.3s@t90
EMC According to EN61000
Insulation resistance 100MΩ
MTBF ≥150000 h/times
Power supply With voltage & digital output:9~36VDC, consumption≤20mA
With current output:16~36VDC, consumption≤40mA
Power supply reject ratio >85dB
Operation temperature range -40~85℃
Storage temperature range -40~100℃
Protection IP67
Housing 6061-T6 aluminum alloy
Connecting Standard:Binder712 connector,optional: metal pigtail
Cable 7-wire shielded cable with tensile reinforcement, heavy duty up to 30Kg
Shock 100@11ms,three-axis, half-sine
Vibration 8grms,20~2000Hz
Weight 240(without connector and cable)
 About Us
Exhibition Contact
 Introduction showcase Contact Us
    New Product News Distributor  
© 2015 Vigor Technology All Rights Reserved. Powered by vigordigital.com